MIL-PRF-24792A
2.3 Non-Government publications. The following documents form a part
of this document to the extent specified herein. Unless otherwise specified,
the issues of the documents which are DoD adopted are those listed in the
issue of the DODISS cited in the solicitation. Unless otherwise specified,
the issues of documents not listed in the DODISS are the issues of documents
cited in the solicitation (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D542
- Standard Test Method for Index of Refraction of
Transparent Organic Plastics. (DoD adopted)
ASTM D570
- Standard Test Method for Water Absorption of Plastics.
(DoD adopted)
ASTM E595
- Standard Test Method for Total Mass Loss and Collected
Volatile Condensable Materials from Outgassing in a
Vacuum Environment. (DoD adopted)
ASTM D696
- Standard Test Method for Coefficient of Linear Thermal
Expansion of Plastics, Between 30 °C and 30 °C. (DoD
adopted)
ASTM D1002
- Standard Test Method for Strength Properties of
Adhesives in Shear by Tension Loading (Metal to
Metal). (DoD adopted)
ASTM D2240
- Standard Test Method for Rubber Property - Durometer
Hardness. (DoD adopted)
ASTM D2393
- Standard Test Method for Viscosity of Epoxy Resins and
Related Components. (DoD adopted)
ASTM D2471
- Standard Test Method for Gel Time and Peak Exothermic
Temperature of Reacting Thermosetting Resins. (DoD
adopted)
ASTM D2566
- Standard Test Method for Linear Shrinkage of
Thermosetting Casting Systems During Cure.
ASTM D3418
- Standard Test Method for Transition Temperatures of
Polymers by Thermal Analysis. (DoD adopted)
(Application for copies should be addressed to the American Society for
Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-
2959.)
ELECTRONIC INDUSTRIES ASSOCIATION/TELECOMMUNICATIONS INDUSTRY
ASSOCIATION (EIA/TIA)
TIA/EIA-455-5
- Humidity Test Procedure for Fiber Optic
Components. (DoD adopted)
TIA/EIA-455-71 - Procedure to Measure Temperature-Shock Effects on
Fiber Optic Components.
TIA/EIA-604-2 - FOCIS 2, Fiber Optic Connector Intermateability
Standard.
(Application for copies should be addressed to the Telecommunications
Industry Association, 2500 Wilson Boulevard, Arlington, Virginia, 22201.)
(Non-Government standards and other publications are normally available
from the organizations that prepare or distribute the documents. These
documents may also be available in or through libraries or other informational
services.)
2.4 Order of precedence. In the event of a conflict between the text
of this document and the references cited herein, the text of this document
takes precedence. Nothing in this document, however, supersedes applicable
laws and regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be
subjected to first article inspection (see 6.3) in accordance with 4.4.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business