METRIC
MIL-PRF-24792A
1 October 1999
SUPERSEDING
MIL-A-24792
31 May 1995
PERFORMANCE SPECIFICATION
ADHESIVE, EPOXY, TWO PART, FIBER OPTICS
This specification is approved for use by the Naval Sea Systems Command,
Department of the Navy, and is available for use by all Departments and
Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers the requirements of a 100 percent
solid epoxy adhesive for bonding optical fibers to metal and ceramic fiber
optic connector and terminus ferrules.
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in
sections 3 and 4 of this specification. This section does not include
documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements documents cited in sections 3 and 4 of
this specification, whether or not they are listed.
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks. The following
specifications, standards, and handbooks form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these
documents are those listed in the issue of the Department of Defense Index of
Specifications and Standards (DODISS) and supplement thereto, cited in the
solicitation (see 6.2).
SPECIFICATIONS
FEDERAL
QQ-A-250/4 - Aluminum Alloy, 2024, Plate and Sheet.
(Unless otherwise indicated, copies of the above specifications,
standards, and handbooks are available from the Standardization Document Order
Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA, 19111-5094.)
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commander, Naval Sea Systems Command, SEA 05Q, 2531 Jefferson Davis Highway,
Arlington, VA 22242-5160 by using the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 6070
Distribution Statement A.
Approved for public release; distribution is
unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business