MIL-PRF-24794A
4.4.3 Failures. One or more failures shall constitute first article
inspection failure.
TABLE II.
First article inspection.
Inspection
Requirement
Test
Sample size
Identification and
3.5.8
4.6.7
All units
marking
Workmanship
3.5.9
4.6.8
All units
Appearance
3.5.1
4.6.1
All units
Index of refraction
3.5.2
4.6.2
1/
Shelf life
3.5.3
4.6.3
2/
Storage temperature
3.5.4
4.6.3
3/
Operating temperature
3.5.5
4.6.4
1/
Flow resistance
3.5.6
4.6.5
1/
Water absorption
3.5.7
4.6.6
1/
1/ Three specimens shall be used from units selected at random from the first
article sample.
2/ Nine specimens shall be used from units selected at random from the first
article sample.
3/ The same specimens shall be used as are used in the shelf life inspection.
4.5 Conformance inspection. Conformance inspection shall consist of the
inspections and tests specified for group A inspection (table III), Group B
inspection (table IV), and Group C inspection (table V), as specified (see
6.2).
Requirements for alternate forms of conformance inspection shall be as
identified in the contract (see 6.3.2).
4.5.1 Group A inspection. Group A inspection shall consist of the tests
listed in table III conducted in the order shown.
TABLE III.
Group A inspection.
Inspection
Requirement
Test
Identification and
3.5.8
4.6.7
marking
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business