MIL-PRF-24794A
4.
VERIFICATION
4.1 General. Material delivered to this specification shall meet all
requirements herein. The manufacturer shall perform the necessary tests and
inspections in order to insure compliance with this specification.
4.1.1 Test equipment and inspection facilities. Requirements for test
equipment and inspection facilities shall be as identified in the contract
(see 6.3.1).
4.2 Classification of inspections.
The inspection requirements specified
herein are classified as follows:
a. First contract inspection (see 4.3).
b. First article inspection (see 4.4).
c. Conformance inspection (see 4.5).
4.3 First contract inspection. First contract inspection (see 6.4.1) is
applicable only on the first acquisition of a particular product under this
specification. First contract inspections (see 6.4.1) shall consist of the
tests listed in table I and shall be conducted in conjunction with first
article inspections. The material submitted for testing shall be
representative of the production process.
4.3.1 Sample. The sample submitted shall be a number of units of the same
PIN sufficient to complete all of the inspections.
4.3.2 Inspection routine. The sample shall be subjected to the inspections
specified in table I. The tests identified in table I may be performed at the
same time as the tests identified in table II.
4.3.3 Failures. One or more failures shall constitute first contract
inspection failure.
First contract inspection.
TABLE I.
Inspection
Requirement
Test
Sample size
Fungus
3.5.10
4.6.9
1/
1/
Three specimens shall be used from the first contract sample.
4.4 First article inspection. First article inspection shall consist of
all the tests listed in table II. The material submitted for testing shall be
representative of the production process.
4.4.1 Sample. The sample submitted shall be a number of units of the same
PIN sufficient to complete all of the inspections.
4.4.2 Inspection routine. The sample shall be subjected to the inspections
specified in table II. The tests identified in table I may be performed at
the same time as the tests identified in table II.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business