MIL-PRF-24793A
3.5.12 Water absorption (see 4.6.10). When cured in accordance with 3.5.4,
the adhesive shall absorb an amount of water not greater than 0.5 percent of
the adhesive weight.
3.5.13 Identification and marking (see 4.6.11). All containers shall be
marked. The markings shall be permanent, clearly visible, and legible.
Marking information shall include the Part or Identifying Number (PIN), CAGE
code, manufacturer's name, lot number, and date of manufacture.
3.5.14 Workmanship (see 4.6.12). All adhesive material shall be uniform in
quality and free from foreign material or any defects detrimental to the
fabrication or performance of the adhesive.
3.5.15 Splice compatibility (see 4.6.13). The adhesive shall securely hold
an optical fiber within a fiber optic splice. The adhesive shall restrict the
axial movement of the optical fiber with respect to the fiber optic splice
ferrule to be less than ± 0.2 µm.
3.6 Shipping. Adhesive material shall not be shipped on any order to this
specification if the shipping date is greater than 90 days from the
manufacturing date.
3.7 Particle diameter. Diameters of particles within the adhesive material
shall be not greater than 5 micrometers.
4.
VERIFICATION
4.1 General. Material delivered to this specification shall meet all
requirements herein. The manufacturer shall perform the necessary tests and
inspections in order to insure compliance with this specification.
4.1.1 Test equipment and inspection facilities. Requirements for test
equipment and inspection facilities shall be as identified in the contract
(see 6.3.1).
4.2 Classification of inspections.
The inspection requirements specified
herein are classified as follows:
a. First contract inspection (see 4.3).
b. First article inspection (see 4.4).
c. Conformance inspection (see 4.5).
4.3 First contract inspection. First contract inspection (see 6.4.1) is
applicable only on the first acquisition of a particular product under this
specification. First contract inspections (see 6.4.1) shall consist of the
tests listed in Table I and shall be conducted in conjunction with first
article inspections (see 4.4). The material submitted for testing shall be
representative of the production process.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business