MIL-PRF-24793A
appropriate shelf life under the actual storage conditions. Storage
conditions should never exceed the temperature specified in 4.6.2.
6.7 MSDSs. The adhesive covered by this specification contains material(s)
which may be hazardous to personnel and a Material Safety Data Sheet (MSDS) is
needed for employee safety programs. Contracting officers will identify those
activities requiring copies of completed MSDSs prepared in accordance with
FED-STD-313. In order to obtain the MSDS, FAR clause 52.223-3 must be in the
contract.
6.8
Conformance inspection.
6.8.1 Rejected lots.
If a group B inspection lot is rejected, the
contractor may rework it to correct the defects, or screen out the defective
units (if applicable), and resubmit the lot for inspection.
6.8.2 Noncompliance.
If a sample fails to pass group C inspection, the
contractor must notify the contracting activity of the failure and take
corrective action on the materials and processes, or both, as warranted, and
on all units of product which can be corrected and which were manufactured
under essentially the same conditions, with essentially the same materials,
processes, and which are considered subject to the same failure. Acceptance
of the product will be discontinued until corrective action, acceptable to the
contracting activity, has been taken. After the corrective action has been
taken, group C inspection must be repeated on additional sample units (all
inspection tests or the inspection test which the original sample failed, at
the option of the contracting activity). Group A and group B inspections may
be reinstituted; however, final acceptance will be withheld until the group C
inspection has shown that the corrective action was successful.
6.9 Safety. This material may contain as much as 8 percent acrylic acid.
Use with adequate ventilation, safety glasses, and protective handwear.
Acrylic acid is a severe skin, eye, and respiratory irritant. Good industrial
and personal hygiene practices must be followed, especially for women of
childbearing age who may come into contact with the material. For skin
contact, wash thoroughly with soap and water. For eye contact, flush with
large amounts of water and contact a physician.
6.10
Subject term (key word) listing.
Fiber optic connectors
Fiber optic adhesive
Acrylate
Custodians:
Preparing activity:
Army - CR
Navy - SH
Navy - SH
Air Force - 11
NASA - NA
Agent:
DLA - CC
Review activities:
Army - MI, SC
(Project 6070-0004)
Navy - AS,
Air Force - 02, 13, 19, 33, 93, 99
DLA - CC
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business